USEPA issued a modification to the Pompton Lakes Works facility RCRA permit on June 22, 2015 to remove mercury impacted soils and sediment from Pompton Lake. The remedy encompasses four areas consisting of approximately 40 acres. The areas identified in the permit modification include upland soils between Rotary Park and the lake, the lake bottom adjacent to Rotary Park, and the lake bottom at two downstream locations. A map depicting these areas is provided above. A Corrective Measures Implementation (CMI) work plan which describes the means and methods upon which the remedy will be completed was approved by USEPA on April 22, 2016. Field activities associated with the remedy commenced in early June 2016. Work completed in 2016 consisted of the removal of soils in the Uplands Are and sediments in the Island Area and Lake Area A. Work completed in 2017 consisted of the removal of sediment from the Delta Area. Environmental monitoring of surface water (turbidity), air (dust and mercury vapor), and noise is being conducted in accordance with the CMI work plan during the removal phases of the remediation program. Download Monitor and Removal Area Detail View

Monitoring Program Data View Archives

Chemours is committed to sharing monitoring data (turbidity, dust, mercury vapor) collected during remedy implementation with the community. The graphs below contain data from the various monitoring locations around the project area.

1. Wind Monitoring

Click Image to Enlarge

2. PM10 Particulate (Dust) Monitoring

Click Image to Enlarge

Comments

Issues were identified with the modem at monitoring station AM-1. As such, data was not recorded during the day. Troubleshooting is in place so that the modem can be made operational again.

3. Mercury Vapor Monitoring

Click Image to Enlarge

4. Turbidity Monitoring

Click Image to Enlarge

View Archives